2020+ Jeep Gladiator JT Cab-to-Bed Antenna Bracket

Cab-to-bed Jeep Gladiator JT antenna bracket (2020+) in black anodized machined aluminum—clears tonneau covers and fits 1/2″ whips, CB, GMRS, and LED whips.

$34.99

83 in stock

🚚 Get your Gladiator JT antenna bracket fast — ships same day by 4PM EST.

Features

  • Fits 2020+ Jeep Gladiator JT trucks
  • Clean cab-to-bed antenna bracket position
  • Machined aluminum for lighter strength
  • Black anodized finish fights corrosion
  • 1/2″ hole for CB, GMRS & whips
  • Clears tonneau covers; left or right fit

Description — 2020+ Jeep Gladiator JT Cab-to-Bed Antenna Bracket

The Kraken Offroad cab-to-bed antenna bracket is built for 2020+ Jeep Gladiator JT owners who want a clean antenna mount that doesn’t interfere with how you actually use your truck.

Most Gladiator antenna mounts force you into compromises: antennas hanging off the bedside, awkward rear-corner placements, or locations that fight tonneau covers and look like an afterthought. This cab-to-bed design tucks your antenna between the cab and the bed using existing mounting points, giving you a centered, purposeful placement that stays out of the way of most tonneau setups and avoids the “antenna on the side of the bed” look.

Each bracket is machined from aluminum and finished in black anodizing, with a laser-etched Kraken logo on the side. The design has been validated with stress analysis for demanding off-road use—because the trail will absolutely test anything that isn’t built right.

The 1/2″ antenna hole supports common setups like CB antennas, GMRS/FRS antennas, whip antennas, and even LED whips. It also plays nicely with flags: if you’re running a Foreverwave-style flag setup, you can position the flag just below the roofline so it still flies without getting punished by wind load as badly at highway speed.

Install is straightforward, and we include the bolts and washers you need so you can mount it up and go. Bonus: the bracket works on either side of the bed—run one for a single antenna, or run two for a balanced dual setup.

Key Features

  • Cab-to-bed mount keeps a clean, OEM-like look
  • Designed to use existing Gladiator JT mounting points
  • Machined aluminum construction with black anodized finish
  • 1/2″ antenna hole fits whips, CB, GMRS/FRS & LED whips
  • Works on driver or passenger side (your choice)
  • Hardware included: bolts + washers
  • Great option for flag setups positioned below roofline
  • Built for demanding use (validated via stress analysis)

Specs — 2020+ Jeep Gladiator JT Cab-to-Bed Antenna Bracket

  • Vehicle Fitment: 2020+ Jeep Gladiator
  • Platform Code: JT
  • Mount Location: Cab-to-bed (between cab and bed)
  • Mounting Method: Uses existing mounting points (no drilling required)
  • Material: Machined aluminum
  • Finish/Coating: Anodized
  • Color: Black
  • Branding/Logo: Kraken logo laser etched
  • Antenna Hole Size: 0.50″ (1/2″)
  • Compatibility: Whip antennas, CB antennas, GMRS/FRS antennas, LED whips, flags (with appropriate hardware)
  • Side Options: Driver or passenger side (fits either side)
  • Included Hardware: Bolts and washers
  • Sold As: Single bracket (buy one or two)
  • Packaging: Kraken-branded box with included hardware

Keywords: jeep gladiator JT antenna bracket, jeep gladiator antenna mount 2020, jeep gladiator cab to bed antenna, gladiator JT antenna mount tonneau cover, jeep gladiator CB antenna mount, jeep gladiator GMRS antenna bracket, aluminum jeep gladiator antenna mount, billet aluminum jeep antenna bracket, jeep gladiator bed antenna mount, jeep gladiator antenna no drilling, cab-to-bed antenna mount, tonneau cover compatible antenna bracket, jeep gladiator LED whip mount, jeep gladiator flag mount bracket, black anodized antenna bracket

FAQ — 2020+ Jeep Gladiator JT Cab-to-Bed Antenna Bracket

Q: What Jeep models does this antenna bracket fit?
A: This bracket is designed for the 2020+ Jeep Gladiator (JT).

Q: Where does the antenna mount sit?
A: It mounts between the cab and the bed (cab-to-bed position) using existing mounting points.

Q: Will this interfere with my tonneau cover?
A: The bracket is designed to clear most tonneau cover setups by keeping the mount in the cab-to-bed gap. Because tonneau designs vary, it’s smart to verify clearance during install.

Q: Do I need to drill into the truck?
A: No—this antenna mount is intended to use existing mounting points (no drilling required).

Q: What size antenna stud/hole does it use?
A: The mounting hole is 1/2″ (0.50″), which works with many whip, CB, GMRS/FRS, and LED whip mounting setups.

Q: Can I mount it on either side of the bed?
A: Yes. The bracket can be installed on either side of the bed—driver or passenger.

Q: Does it come with hardware?
A: Yes. Bolts and washers are included so you have what you need to mount it.

Q: Should I run a spring mount?
A: We recommend a spring mount for antennas/whips, and it’s especially helpful when running a flag because it reduces stress from wind and trail impacts.

Q: How high will my antenna sit above the roofline?
A: As a general reference, a 2 ft antenna without a spring may sit roughly a couple inches above the roofline; adding a spring can add a few more inches. Exact height depends on your antenna, spring, and mounting stack-up.

Q: Can I run a flag on this bracket?
A: Yes—this mount works well for flag setups when paired with the right antenna/whip and a spring mount, and many people prefer keeping the flag just below the roofline for a good balance of visibility and reduced wind load.

Shipping — Fast Delivery for Your 2020+ Jeep Gladiator JT Antenna Bracket

We built this Jeep Gladiator JT antenna bracket to be simple to order and fast to get on your truck—because nobody wants their radio/flag setup waiting on slow fulfillment.

Warehouses Across the U.S. = 3 Business Days or Less

We ship from U.S. warehouses in TX, CA, and PA. Most orders arrive in 3 business days or less depending on your location and carrier routing.

Same-Day Shipping (Orders by 4PM EST)

Orders placed Monday–Friday by 4PM EST typically ship the same day. You’ll get tracking as soon as the label is created so you can plan your install.

Rural Delivery Support via Amazon Logistics (When Needed)

For some rural routes, we may use Amazon Logistics to improve delivery reliability and keep transit times competitive.

Always Getting Faster

As our fulfillment network expands, our goal is to push average delivery closer to ~2 business days—without compromising packaging and quality checks.

If you need your cab-to-bed antenna mount for a trip or event date, order early and reach out with your ZIP code—we’ll help you pick the best shipping option.

Warranty & Returns — 2020+ Jeep Gladiator JT Antenna Bracket

We stand behind the Jeep Gladiator JT antenna bracket because it’s built for real use—mud, vibration, weather, and the kind of trail days that rattle everything loose.

30-Day Returns (No Questions Asked)

If you’re not happy with your purchase, you can return it within 30 days of delivery for a refund. Keep the parts together and in good condition, and we’ll make the process straightforward.

1-Year Manufacturing Defect Warranty

If your bracket has a manufacturing defect within 1 year of purchase, we’ll replace it. This covers issues tied to materials or workmanship under normal use.

Normal wear, cosmetic changes over time, misuse, improper installation, and accidents/trail impacts are not considered manufacturing defects.

How to Start a Return or Warranty Claim

  1. Review full details here: https://krakenoffroad.com/best-warranty-in-the-offroad-community/

  2. Submit your claim here: https://krakenoffroad.com/submit-for-return-or-warranty/

  3. Include your order number and a quick photo if relevant—our support team will take it from there.

Function over fashion is fun… but function over headaches is the real luxury.